home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
COMMUNIC
/
H097.ZIP
/
TM4123.ZIP
/
UPGRADE.DOC
< prev
next >
Wrap
Text File
|
1993-07-20
|
4KB
|
94 lines
Upgrading from v4.11 to v4.12
───────────────────────────────────────────────────────────────────────────
Upgrading from 4.11 is sample, you can replace the following
files with the new ones
TM.EXE the main program
TM.OVL the main program (overlay)
TM.RES the resource file
TM.HLP the help file
There is no change in the configuration file format.
Note: DO NOT change the version number in TM.CFG. It should read
4.11 even you are running 4.12.
Upgrading from v3.xx and v4.00 to v4.12
───────────────────────────────────────────────────────────────────────────
To upgrade from v3.xx and 4.00, you can replace the following files
with the new ones
TM.EXE the main program
TM.OVL the main program (overlay)
TM.RES the resource file
TM.HLP the help file
TMINST.EXE the installation program
HOST.SCR the host script (inside HOST.EXE)
HCONFIG.SCR the host configuration script (inside HOST.EXE)
Then run "UPGRADE TM.CFG" to upgrade your configuration file to the
new format.
The old script files (both *.SCR and *.TMS) are compatible with the
new ones. However, a v4.11 script may not run correctly in an older
version if the script contains the new "QUERY QUOTESTRING, ..." and
"SET QUOTESTRING, ..." commands.
If you want to use the GIFLink X/Y/Zmodem/QuickB protocol driver,
you should also copy
GIFLINK.EXE the main GIFLink program
GIFLINK.DOC the document
GKZ-U.BAT the upload batch file for GIFLink's Zmodem
GKZ-D.BAT the download batch file for GIFLink's Zmodem
GK-QB.BAT the upload and download batch file for QuickB
Upgrading from v2.xx to v4.11
───────────────────────────────────────────────────────────────────────────
This upgrade procesure assumes that you have Telemate already installed
in the directory \TM,
1. Before you do anything, MAKE A BACKUP of the \TM directory. You WILL
NEED some files from it later.
2. Copy all files (or extract them from the .ZIP) to \TM. You can
overwrite all the files.
3. Copy the TM.CFG from your backup to \TM and at the DOS prompt run
"UPGRADE TM.CFG".
4. Copy the TM.FON and TM.MEM from your backup to \TM.
5. Delete all *.TMS files.
6. Run TMINST.EXE to check if all the options are setup correctly.
7. If you are using the HOST script, you can run HOST.EXE to extract
the host script, copy the HUSER.HST from the backup to \TM and
then run the script HCONFIG.SCR to setup the host mode.
If you want to install v4.11 in a different directory, say C:\TM4,
1. Copy all the files (or extract them from .ZIP) to C:\TM4.
2. Copy the TM.CFG from \TM to C:\TM4 and at the DOS prompt run
"UPGRADE TM.CFG".
3. Edit TM.CFG and changes the lines to
DirTelemate="C:\TM4\"
DirScript="C:\TM4\"
* It is VERY IMPORTANT that you have the directory set up correctly.
Otherwise, Telemate will not run.
4. Edit your AUTOEXEC.BAT and change (or add) the line
SET TMCFG=C:\TM4\TM.CFG
5. Copy the TM.FON and TM.MEM from \TM to C:\TM4.
6. Run TMINST.EXE to check if all the options are setup correctly.
Notes:
1. The new *.MAC and *.PAD are not compatible with the old ones. You
will have to set up your macro again.
2. If you are using a 101-key keyboard, you should turn ON the 'Enhanced
Keyboard' option under the Options/Mouse & Keyboard dialog.
3. The VT102 keypad table is changed in order to emulate the actual
terminal more accurately. Please refer to Appendix B in the file
TELEMATE.DOC for details on the keyboard assignment.